このページの2つのバージョン間の差分を表示します。
両方とも前のリビジョン 前のリビジョン 次のリビジョン | 前のリビジョン | ||
tools:ups:apc:operation:configration [2020/12/17 08:37] michiya |
tools:ups:apc:operation:configration [2021/01/09 14:37] (現在) |
||
---|---|---|---|
行 18: | 行 18: | ||
</ | </ | ||
- | / | + | / |
< | < | ||
# Defaults for apcupsd initscript (unused with systemd as init). | # Defaults for apcupsd initscript (unused with systemd as init). | ||
行 27: | 行 26: | ||
</ | </ | ||
+ | 再起動 | ||
+ | < | ||
+ | # systemctl restart apcupsd.service | ||
+ | </ | ||
+ | |||
+ | 状態を確認 | ||
< | < | ||
- | # apctest | + | # apcaccess status |
</ | </ | ||
< | < | ||
- | 2020-12-17 | + | APC : 001, |
- | Checking configuration ... | + | DATE : |
- | sharenet.type = Network & ShareUPS Disabled | + | HOSTNAME : demo1 |
- | cable.type = USB Cable | + | VERSION |
- | mode.type = USB UPS Driver | + | UPSNAME |
- | Setting up the port ... | + | CABLE : USB Cable |
- | apctest FATAL ERROR in apctest.c at line 321 | + | DRIVER |
- | Unable to open UPS device. | + | UPSMODE |
- | | + | STARTTIME: 2020-12-17 17:59:27 +0900 |
- | | + | MODEL : Smart-UPS 1500 |
- | apctest error termination completed | + | STATUS |
+ | BCHARGE | ||
+ | TIMELEFT : 45.0 Minutes | ||
+ | MBATTCHG : 5 Percent | ||
+ | MINTIMEL : 3 Minutes | ||
+ | MAXTIME | ||
+ | ALARMDEL : 30 Seconds | ||
+ | BATTV : 27.3 Volts | ||
+ | NUMXFERS : 0 | ||
+ | TONBATT | ||
+ | CUMONBATT: 0 Seconds | ||
+ | XOFFBATT : N/A | ||
+ | STATFLAG : 0x05000008 | ||
+ | MANDATE | ||
+ | SERIALNO : J12034211463 | ||
+ | NOMBATTV : 24.0 Volts | ||
+ | FIRMWARE : UPS 09.5 / ID=18 | ||
+ | END APC : 2020-12-17 18:02:22 +0900 | ||
</ | </ |